OB-Xd 4 is out: a new synthesizer modeled on a real Oberheim OB-X8, with a built-in OB-X8 librarian. Retromulator 2.4 adds the Nordic 2 and MiniD cores and up to 8 cores in one instance.
OB-Xd 4.0
OB-Xd 4 was matched to measurements of a real OB-X8: the oscillators, every filter type, the envelopes, the LFOs, portamento and the differences between the eight voices were recorded on the hardware and compared sample by sample. The video plays the same programs on the OB-X8 and on OB-Xd 4.
What's New
OB-Xd 4 Engine: Envelopes, LFO, portamento, voice allocation and arpeggiator follow the OB-X8 firmware. The oscillators keep running between notes as on the hardware.
Every OB-X8 Filter: OB-X 2-pole, OB-Xa 2-pole and 4-pole, Modified OB-Xa 4-pole, and the SEM high pass, band pass and notch.
OB-X8 Panel: The OB-X8 layout with its second parameter page, the same parameters and value ranges as the unit, and the hardware key combinations.
Split, Double and Binaural: Two programs per entry in banks of 128, as on the OB-X8.
Arpeggiator and Chord Memory: Arp Transpose, host tempo sync, and chord memory with key limit and hold modes.
OB-X8 Librarian: Link an OB-X8 over USB for two-way editing and program changes, download and write banks, back up and restore the unit, and send OS updates.
More: MPE as the OB-X8 plays it, MIDI Learn on every control, MTS-ESP, an Engine menu (Eco, Normal, Max), and OB-Xd 3 programs on their own Legacy engine.
OB-Xd 4 is $99 until December 31, then $199. Owners of OB-Xd 2 or OB-Xd 3 and TED-8 upgrade for $29, and owners of OB-Xd 2, OB-Xd 3, TED-8, Discovery, Discovery Pro or Corona for $49, from the members area. The free version is fully playable for non-commercial use, with oversampling off and a short noise burst in bounces made with the OB-Xd 4 engine.
Retromulator 2.4
Retromulator runs classic hardware synthesizers from their original firmware or circuit models. Versions 2.2 to 2.4 add two discoDSP cores, racks of up to 8 cores, and the OB-Xd 2 core.
What's New
Nordic 2: The Nord Lead 2 recreated by discoDSP without firmware or ROM data, clean-room coded like Nordic 1: 64 voices in place of the unit's 16, Performance mode with four slots, the Shift functions and kits. It reads Nord Lead 2 and N2X banks as they are and takes over from the Nord N2X core, so existing sessions and banks load into it.
MiniD: An analog three-oscillator monosynth voiced from measurements of analog hardware, with a ladder filter, filter and loudness contours, poly, unison and double voicing, and a Factory bank of 49 presets.
Racks: Up to 8 cores in one instance, rendered in parallel, each with gain, pan, mute and solo, octave, key and velocity splits and MIDI channel. Rack Presets save whole stacks.
OB-Xd 2: discoDSP OB-Xd 2 as a core with its own editor. When OB-Xd 2 is installed, the core shares its banks and presets.
Boards: Compact, Spread and Expanded layouts.
Nordic: Morph and all-slot knob functions, Engine Oversampling, and Nord Lead 2 bank import.
The Nordic 2 factory banks of the Nord Lead 2 and Nord Lead 2X:
The MiniD core:
This update is free for all Retromulator customers.
November 1, 2026 FX Bundle, TED-8, Retromulator 2, Discovery Pro 9
This update adds ThrillMe Classic to the FX Bundle, brings arpeggiator modes from the latest TEO-5 firmware and MPE to TED-8, a Nord Lead 1 core and an effect chain in Retromulator, and Nord Lead style wide unison in Discovery Pro.
FX Bundle 3.15: ThrillMe Classic
ThrillMe Classic joins the FX Bundle next to ThrillMe 3. It is the 2002 ThrillMe tube compressor rebuilt from its original DSP, with a new 3D panel based on the original design.
What's New
Original Signal Chain: Exciter EQ, three-band compressor with fixed attack and release per band, peak limiter and tube saturation, recovered from the original binary.
Tube Stage: 8x oversampling in realtime and 16x linear-phase when bouncing offline.
True-Peak Limiter: A lookahead limiter at -0.3 dBTP after the tube stage keeps the output below full scale.
Release Modes: Classic, with the original fixed times, or SSL-style Auto release.
Input and Mix: Shift-drag or right-drag the two small knobs. Every control takes MIDI learn.
Panel: Rendered at 4x resolution, resizable from 100% to 200%.
Formats: AU, VST, VST3, AAX and standalone on macOS and Windows; VST, VST3 and standalone on Linux.
This update is free for all FX Bundle customers.
TED-8 1.4.5
TED-8 is the Oberheim TEO-5 as a plugin, built from thousands of measurements of a real unit. Versions 1.2 to 1.4.5 add the new TEO-5 arpeggiator modes, MPE and microtuning, and faster modulation editing.
What's New
Arpeggiator: The modes from TEO-5 OS 1.2: Pinky Up and Down, Thumb Up and Down, Spiral, Leapfrog, Shuffle, Shuffle Once, Rand Walk and Chord.
Modulation: Every modulatable control has a Mod Matrix submenu. Knobs moved by a matrix slot, an LFO or Env 1 show the modulated value as a green ring, and Alt + drag on the knob sets the slot amount.
MIDI: MPE, MTS-ESP and the 65 scales of the TEO-5, a Low Split with a note picker, a separate MIDI Out channel, Pot Mode, Program Send and Receive, and MIDI-learnable SEQ PLAY and SEQ RECORD.
Section Presets: Presets for the mod matrix, both LFOs, the arpeggiator, the effect and the reverb, tuned from the TEO-5 factory banks.
X-Mod: 4x oscillators for X-Mod in realtime, and X-Mod above 32 follows the TEO-5.
Browsing: Presets listed by category on the LCD, optional − and + buttons for program stepping, and Page Up and Page Down to step programs from NKS preset macros in Komplete Kontrol.
Fixes: OB-Xd imports with sync or X-Mod play as intended, the sequencer keeps the first step when the host loop wraps, and fractional scaling works on Linux.
This update is free for all TED-8 customers.
Retromulator 2.1
Retromulator runs classic hardware synthesizers from their original firmware or circuit models. Version 2.1 adds the Nordic core and a chain of VST3 effects after any core.
What's New
Nordic: The original 1995 Nord Lead on a clean room C++ reimplementation of its DSP program, bit exact to the original and checked against a real Nord Lead 1, so no ROM is needed. 48 voices, unison, morph, arpeggiator and all four slots A-D, with its own editor below the rack. Nord Lead 2 programs can be imported and exported.
FX Chain: VST3 effects in series after any core, or on the audio input with the None core, with chain presets saved in the session. Plugins are scanned in a separate process, so one that hangs or crashes is left out instead of taking the DAW down.
Built-In Effects: ThrillMe Mastering Compressor and Schroeder Reverb, each with its own board.
Backup: App data can be restored from a .zip URL as well as a file.
NKS: Page Up and Page Down step to the previous and next preset.
Fixes: No more DX7 crackles, Pro Tools hangs while writing automation in Touch mode, or Virus, microQ and Nord Lead 2X crashes on Linux. Loading a project no longer reboots the running core, board controls show the saved values, and Nord N2X performance banks play.
This update is free for all Retromulator customers.
Discovery Pro 9.8
Discovery Pro is a 4 layer virtual analog synthesizer and sampler. Version 9.8 adds wide unison and brings Super 7 and the Retro Cell 2 engine closer to the hardware.
What's New
Wide Unison: The rotating unison detune of the Nord Lead 1 and 2X, set per bank and shown as a WIDE pill in the Unison Editor. New banks have it on, older banks load with it off.
Super 7: Follows measurements of the JP, with a bank-wide Mix control in the Super 7 editor, a pitch-tracked high-pass filter and the measured detune offsets.
Retro Cell 2: Follows the Nord Lead 2X behavior: oscillators, FM depth, sync, noise, envelope curves and times, LFO rates and shapes, and the filter envelope.
Arpeggiator MIDI Out: Arpeggiator notes are sent to the DAW, layers A-D on channels 1-4, so the host can record them.
Fixes: Right-click on a button no longer also clicks it on Windows.
This update is free for all Discovery Pro 9.x customers.