OB-Xd 4.1.2 fixes knobs that some Windows graphics cards left undrawn and makes the program display sharp at every size.
Knobs on Windows: Knobs no longer disappear on some graphics cards, such as Intel HD integrated graphics. A second plug-in instance no longer blanks knobs when another editor closes.
Program Display: The bank and program names are sharp at every GUI size and display scale. They were blurry on Windows at 100%.
Faster Reopening: The editor opens again right away after you close it.
MIDI Learn Menu on Windows: A value list left open no longer opens the MIDI Learn menu on top of it.
Arp Hold: Keys you play after turning on Hold while the arpeggiator runs are now latched too.
OB-Xd 4.1.1 opens much faster on Windows and adds MIDI Learn for program and bank navigation.
Faster Opening on Windows: The window opens in under 2 seconds at every GUI size. It could take 9 seconds or more before, and much longer with some graphics drivers.
Program Navigation MIDI Learn: MIDI > Program Navigation learns a CC or NRPN for Previous / Next Program, Previous / Next Bank and Bank Select. It works with the editor closed and is saved in the MIDI map. The BANK knob learns Bank Select from its right-click menu.
OB-X8 Link: A restored session sends its edits to the unit's edit buffer every time the host restores it, also in Logic.
Update OS: The menu item shows the OS version the unit runs now.
OB-Xd 4.1.0 brings the engine closer to the analog hardware. Filters, oscillator and noise levels, envelopes and LFOs were measured from analog hardware again and refit, and the factory programs were checked by ear and by spectrum.
Filters: All filter types were refit: the cutoff range now reaches the top of the knob, low cutoff settings lose a little level, resonance and damping were refit, and each of the eight voices has its own small cutoff, level and damping offset.
Oscillator and Noise Levels: The oscillator level knobs use a refit curve on every voice, including the level difference between Osc 1 and Osc 2. The noise level is now linear in the knob; noise at low settings was far too quiet before.
Type B Envelopes: The filter envelope amount shapes the attack, so low amounts rise later. Decay and release are slightly faster.
Filter Velocity: Velocity now changes only the filter cutoff, not the filter envelope's pitch modulation of Osc 2.
Amp Attack: Slow attacks take 3 % longer.
LFO: LFO to volume uses a refit tremolo depth, so deep Type B tremolo no longer cuts the sound to silence. Type B LFO pitch depth is 2 % lower. Sample and hold with Shift Voice 5-8 steps on a shared clock. The right-click BPM menu sets the correct LFO rate.
Vintage: Portamento with Vintage below 36 was refit.
LFO Volume Dest: Routing the LFO to Osc 2 level gates the oscillator fully again.
Arpeggiator: Presets saved with early 4.0 builds play the arpeggio in key order instead of a random order.
OB-X8 Link: Turning Vintage on the unit no longer switches the panel to Page 2.
Plugin Validation: The Split and Double parameters are flagged as parameters that change others, so the AU passes validation.
Panel Labels: Labels in the label boxes and above the keys are centred vertically.
Help Menu: The release number is listed below Trademarks again.
OB-Xd 4.0.3 fixes presets loading with a high vibrato depth, follows the OB-X8's BANK knob over the link, and exports the arpeggiator as a MIDI file.
Vibrato Depth Fix: Presets no longer load with the vibrato depth turned up. A stray MIDI CC 38, for example from a host that routes the plugin's MIDI output back to its input, could rewrite the last OB-X8 NRPN received, such as vibrato depth.
OB-X8 BANK Knob: With OB-X8 Link on, turning BANK on the unit loads the same bank in OB-Xd 4 and selects the program the unit plays.
Your Banks on the OB-X8: Picking one of your own banks while linked keeps the link. Each program you select plays on the unit through its edit buffer, so nothing stored on the unit is overwritten.
Session Recall on the OB-X8: Opening a saved session while linked sends its program to the unit.
Arpeggiator to MIDI: Hold ARPEGGIATE and drag it to your host to export one bar of the arpeggio as a .mid file, with the keys you hold (C E G when none are held).
OB-X8 SysEx Import: Import Bank and Import Preset read OB-X8 User Group files. Dropping an OB-X8 .syx file on the window imports it: a single program goes into the current slot, a larger file loads as a bank.
Program Display: With the Default theme, the preset display shows the name only, since the group and program number are already on the program display.
New Preset and Reset: Use the built-in init program when Presets/Default.fxp is missing.
Filter and Type Names: The filter types are now named 2-Pole A, 2-Pole B, 4-Pole, 4-Pole Mod, SV High Pass, SV Band Pass and SV Notch, and the Page 2 envelope, LFO and square wave laws Type A and Type B. Programs keep their settings.
Factory Content Names: Factory presets and bank programs got new names, and the first bank is now 001 - FMR Patch Book. Sessions that used the old bank name still find it. The installer removes the old factory files only when you have not changed them.
Trademarks: Help > Trademarks shows the trademark notice.
OB-Xd 4.0.2 puts preset and bank file commands and Disk Mode in the preset and bank display menus.
File Menus on the Displays: Click the preset display for a File submenu with the preset commands (save, rename, reset, reload, import, export), or the bank display for the bank commands. Search Presets sits right below.
Disk Mode: Turn Disk Mode on and off from the bank display menu or from MENU > Banks, to browse the preset files in your Presets folders instead of the loaded bank.
Save Preset to Disk: In Disk Mode, saves the current sound as a preset file in the folder you are browsing. The program takes the file's name.
OB-Xd 3 Banks: Dropping an OB-Xd 3 bank on the window now asks whether to convert it to the OB-Xd 4 engine, as Import Bank does. The separate Convert menu item is gone.
Export Preset to (macOS): Picking a folder in this submenu now saves the preset there. Before, it did nothing.
Preset Search: Results tick only the preset you loaded, not every preset with the same name, and the search line sits greyed out at the top of the bank menu.
OB-Xd 4.0.1 fixes a crash when loading the AAX plugin in Pro Tools and imports the OB-X8 Split, Double and Binaural bank files.
Split / Double Bank Import: Import Bank now reads OB-X8 Split+, Double+ and Binaural .syx files and single Split / Double entries, and stores them in the Split / Double banks.
Pro Tools Crash Fix: Inserting OB-Xd 4 on an instrument track or opening a session that uses it no longer crashes Pro Tools.
OB-Xd 4.0 is a new synthesizer with an engine measured from analog hardware, and an editor and librarian for the OB-X8.
New Engine: Oscillators, filters, envelopes, LFOs, portamento and the differences between the eight voices measured from audio renders. Envelopes, LFOs, portamento, voice allocation and the arpeggiator were timed and matched against audio renders.
Seven Filter Types: 2-Pole A, 2-Pole B, 4-Pole, 4-Pole Mod, and SV High Pass, SV Band Pass and SV Notch.
Panel: A second parameter page, programs that read and write OB-X8 SysEx and work over the OB-X8 link, and key combinations.
Split, Double and Binaural: Two programs per entry in banks of 128.
Arpeggiator and Chord Memory: Arpeggiator with Arp Transpose and host tempo sync, chord memory with key limit and hold modes.
OB-X8 Editor and Librarian: Link an OB-X8 over USB for two-way editing and program changes, download and write banks, back up and restore the unit, and send OS updates.
MPE: Per-note bend, CC 74 and pressure.
Engine Menu: Eco, Normal and Max trade CPU for oversampling. Registered bounces always render at Max.
OB-Xd 3 Programs: Load and play on the Legacy engine with their own filter, envelopes and LFO.
OB-X8 is a registered trademark of Sequential Synths Limited. Oberheim and SEM are registered trademarks of Marion Systems, LLC. discoDSP is not affiliated with, endorsed by or licensed by Sequential Synths Limited or Marion Systems, LLC.